InverFan Variable Speed Pump 1 HP Mono

InverFan filtration pump

The Variable Speed Pump is a model with a speed variator   smart with an easy-to-use panel that allows you to read your consumption. Furthermore, the pump operates between 30% ~ 100% and comes with backwash in just one click, allowing operation at 100% of the pump's capacity.

Variators are the new generation of inverters coupled to the motor , specially designed to control and protect pumping systems based on the speed variation of the electric pumps, guaranteeing energy savings due to speed control, smooth starting and stopping and durability and reliability of the system.

Energy Savings

Engine Speed
The higher the frequency (Hz), the higher the engine rotation speed (rpm). In 2-pole motors the rotation is approximately [frequency x 60]:
- 30Hz ~ 1800rpm
- 40Hz ~ 2400rpm
- 50Hz ~ 3000rpm

The flow rate is proportional to the speed
Pressure is proportional to the square of velocity
Power is proportional to the cube of speed

For example, if we reduce the speed by 30%, the new parameters will be:
Flow rate ~ 70% of original
Manometric height ~ 49% of original
Power ~ 34% of original

Benefits:

Motor efficiency class : IE4: For greater efficiency and to achieve extremely quiet performance.
Soft start: Start from 0 amps to nominal amps that allow continuous operation.
Optional external control: Digital input: To control the pump with more options.
Noise: 36 dB.

Specific features:

Ambient temperature: Indoor installation, operating temperature: -10 ºC ~ 40 ºC.
Water temperature: 5 ºC ~ 50 ºC.
Salt concentration: up to 0.5%, i.e. 5 g/l.
Humidity: ≤90% RH, (20 ºC ± 2 ºC).
Altitude: Do not exceed 1000 m above sea level.
Installation: The pump can be installed at most. 2 m above water level.
Protection: Class F, IP55.

Description: Possibility of backwashing, using a button,
allowing the pump to operate at 100% capacity.

Fixed speed pump vs variable speed pump comparison

For more information, see the   Instruction manual