LEO AJm90 JET Automatic Water Pump 1.20CV, 230V

Centrifugal self-priming pump suitable for water supply to domestic installations with aço inox turbine. Equipped with an electronic device for automatic control and protection of the electric pump, this system is equipped with an electronic sensor integrated into the circuit that controls the starting and stopping of the electric pump and has a safety system against dry running. Replaces the traditional autoclave, pressure switch, check valve and level switch system.

This device automatically turns on the electric pump when any water point is opened and stops after a delay of 15 to 20 seconds as soon as there is no more water consumption. Self-priming centrifugal pump with JET system, with great suction capacity. Recommended for domestic applications, pressure groups, garden watering, washing, etc.

Very compact, silent and with great suction power.

Centrifugal self-priming pump suitable for water supply to domestic installations with aço inox turbine.

Operation
Nominal pressure: 3 Bar @ 55 l/m
Fluid: Clean waters and non-aggressive or viscous liquids, free of solid substances.
Maximum fluid temperature: 40 ºC
Maximum suction height: 8 m

Constructive characteristics
Pump body: Cast iron
Pump support: Cast iron
Turbine: Inox 304 Steel
Diffuser: Noryl
Motor shaft: inox AISI 304 steel
Mechanical seal: Ceramic/Graphite

Electric Motor
Two-pole induction type, closed and self-ventilated, suitable for continuous operation, with IPX4 degree of protection and class F insulation. Single-phase 230V - 50Hz with permanent capacitor. Motors must be thermally protected by the user.

Connections
Suction: 1" - Compression: 1"

*The components of this kit are supplied in separate packaging.

FOR MORE INFORMATION, SEE THE TECHNICAL SHEET AND THE USER MANUAL .