Product Name | Price | Delivery |
---|---|---|
Pump Victoria Plus, 0.75CV, 230V Cód.ASTR38771 |
€554.73 €333.00 |
|
Pump Victoria Plus, 0.75CV, 400V Cód.ASTR38772 |
€554.73 €333.00 |
|
Pump Victoria Plus, 1.00CV, 230V Cód.ASTR38773 |
€571.95 €344.00 |
|
Pump Victoria Plus, 1.00CV, 400V Cód.ASTR38774 |
€571.95 €344.00 |
|
Pump Victoria Plus, 1.50CV, 230V Cód.ASTR38775 |
€643.29 €386.00 |
|
Pump Victoria Plus, 1.50CV, 400V Cód.ASTR38776 |
€643.29 €386.00 |
|
Pump Victoria Plus, 2.00CV, 230V Cód.ASTR38777 |
€660.51 €397.00 |
|
Pump Victoria Plus, 2.00CV, 400V Cód.ASTR38778 |
€660.51 €397.00 |
|
Pump Victoria Plus, 3.00CV, 400V Cód.ASTR38780 |
€708.48 €426.00 |
Product Description
AstralPool range of high performance pumps.
The Victoria Plus pump has a sober and robust design, with low-noise operation due to the rubber supports on which it rests. New generation pre-filter cap nut, easy to handle.
IP-55 protection motor.
Large capacity pre-filter basket.
Available in models from 1/2 HP to 3 HP, with single-phase or three-phase motors.
Single-phase: 230 V II (common in domestic electrical installations) / Three-phase: 230/400 V III. If you are unsure, check with your electrician.
The Victoria Plus generation of pool pumps arises from the fusion of the Astral Victoria and Sprint pumps. With this range AstralPool offers a high performance pump where its construction, using technical plastics and top quality stainless steel, guarantees high performance.
It is a monobloc centrifugal pump with automatic suction capacity with single-phase or three-phase motors ranging from 1/2 HP to 3 HP. The new generation of motors in the Victoria Plus range allows working with a voltage range of +/- 10% in relation to the nominal motor, that is, in the event of a rise and fall of any voltage up to a maximum of 10%, the electric pump will operate normally.
All pump parts are made of technical plastic, thus avoiding any corrosion problems.
The diffuser body is made of Luranyl® and the impeller is made of Noryl® with fiberglass filling, giving them resistance and finishing at the highest level.
Mechanical seal in AISI-316 stainless steel and silicon carbide.
Class F insulation and IP-55 motor protection.
Bearings protected against the effects of humidity.
Self-priming up to 2 meters.
Large capacity pre-filter.
Specification
VOLUME | CIRCULATION | FILTRATION | Ø FILTER | BOMB |
30 m³ | 8 am | 50 m³/h/m² | 300mm. | 0.33 HP |
40-50 m³ | 8 am | 50 m³/h/m² | 400mm. | 0.50 HP |
70-80 m³ | 8 am | 50 m³/h/m² | 500mm. | 0.50 HP |
90-100 m³ | 8 am | 50 m³/h/m² | 600mm. | 0.75 HP |
100-140 m³ | 8 am | 50 m³/h/m² | 750mm. | 1 HP |
140-170 m³ | 8 am | 50 m³/h/m² | 800mm. | 1.50 HP |
170-200 m³ | 8 am | 50 m³/h/m² | 900mm. | 2HP |
Documents
For more information, see the Technical Data Sheet