Product Description
Multi-Action Chlorine CTX-393 0% Bórico.
Multi-Action Chlorine Treatment for maintaining your pool.
Slow and continuous dissolution
Disinfection, anti-algae, flocculant, coagulant, chlorine stabilizer
FEATURES
NON-OXIDIBLE solid compound in tablets, specially formulated so that with its single application to the pool water it is possible to eliminate bacteria, viruses and microorganisms in general; prevent the development of algae and keep the water transparent and crystal clear.
Product suitable for disinfecting swimming pools built with ceramic materials. This product should not come into direct contact with pools made with liner, polyester or vinyl, or painted, as it may cause discoloration.
CTX-393 offers the action of a chlorinated disinfectant, a flocculant action and also an algicidal action. In addition, it stabilizes the disinfectant against UV radiation.
If you have a pool covered with liner, polyester or vinyl, place a tablet in the Blue Line Tablet Dispenser – Astralpool
HOW TO USE
Always adjust the pH before adding chlorine to the water, to ensure that it is as effective as possible. Introduce the required dose of product into the skimmers, then start the filtration equipment so that the product can be dissolved when the water circulates through the skimmers.
It is essential that the entire volume of water in the pool is recirculated through the purification equipment daily. The free residual chlorine should be between 0.5 and 2 mg/l, a value that can be easily measured using a chlorine and pH analyzer kit. This control should be carried out at least twice a day.
DOSAGE
Treatment Start of season: Add 15 g of ClorShock for each m3 of water. After 2 hours, adjust the pH of the water to between 7.2 and 7.6 using ctx 10 pH Minus solid or ctx 20 pH Plus solid.
This treatment should be repeated whenever a lack of transparency in the water is noticed.
These doses are merely indicative and may be modified depending on the specific characteristics of each pool, the climate, etc.
Maintenance treatment:
With the water pH adjusted, add 1 Multifunctional Tablet tablet for every 25 m3 of water every 7 or 10 days.
These doses are for guidance purposes only and may be modified depending on the characteristics of each pool, climate, etc.
PROPERTIES
Appearance Solid in tablets
Color White and blue
pH (1%) 2.5 - 3
The usage advice is given for information purposes only and may vary due to changes in the formula or modifications made by the manufacturer. It is necessary to follow the instructions contained on the label accompanying the product.
Documents
For more information, see the Technical Data Sheet-PT
For more information, see the Safety Data Sheet-PT