Jet Domestic Hydropressor Group w/ Stainless Steel Autoclave

Sistema de pressurização de rede composto por:

• 1 - Jet Pump, 230V, 1.00CV
• 1 - 24L stainless steel autoclave
• 1 - Record 5 ways
• 1 - Pressure switch PS+
• 1 - Pressure gauge 0-6 Kg/cm2

Funcionamento do grupo
The hydropnematic group performs the starting and stopping system via the pressure switch. As soon as there is water consumption, the first supply is made from the autoclave. When the pressure drops to the starting regulation level, the pump starts working. The pump stops automatically as soon as it reaches the stop pressure, which was set on the pressure switch.

This system is supplied with a good performance JET type electric pump.

Caracterisiticas da electrobomba
Fluid: Clean water and non-aggressive, non-viscous liquids, free of solid substances.
Maximum fluid temperature: 40°C
Maximum suction height: 7 m
Pump body: cast iron
Impeller: Noryl
Diffuser: Noryl
Motor shaft: stainless steel
Mechanical seal: Ceramic/Graphite
Two-pole induction type electric motor, closed and self-ventilated, suitable for continuous operation, with IP44 degree of protection and class F insulation. Single-phase 230V - 50Hz with permanent capacitor. Motors must be thermally protected by the user.

Nota: Para o correcto funcionamento dos grupos de pressurização, estes têm que ser equipados com válvula de retenção na aspiração (aspiração positiva) ou válvula de pesca (aspiração negativa).

*Os componentes deste kit são fornecidos em embalagens separadas.