Domestic Jet Hydropressor Group w/ Plate Autoclave

Network pressurization system consisting of:

• 1 - Jet pump, 230V, 1.00CV

• 1 - 24L autoclave in painted sheet metal

• 1 - Record 5 ways

• 1 - PS+ pressure switch

• 1 - Pressure gauge 0-6 kg/cm2

Group functioning
The hydropnematic group performs the starting and stopping system through the pressure switch. As soon as water is consumed, the first supply is made from the autoclave. When the pressure drops to the start setting level, the pump starts to work. The pump stops automatically as soon as it reaches the stop pressure, which was set on the pressure switch.

This system is supplied with a JET type electric pump

Features of the electric pump
Fluid: Clean waters and non-aggressive or viscous liquids, free of solid substances.
Maximum fluid temperature: 40 ºC
Maximum suction height: 7 m
Pump body: Cast iron
Impeller: Noryl
Diffuser: Noryl
Motor shaft: Stainless steel
Mechanical seal: Ceramic/Graphite
Two-pole induction type electric motor, closed and self-ventilated, suitable for continuous operation, with IP44 degree of protection and class F insulation. Single-phase 230V - 50Hz with permanent capacitor. Motors must be thermally protected by the user.

Note: For the pressurization groups to function correctly, they must be equipped with a suction check valve (positive suction) or fishing valve (negative suction).

*The components of this kit are supplied in separate packaging.