Granular Chlorine CTX-922

Quick dissolution.

Rapid increase in chlorine rate.

Stable chlorine, longer lasting in water.

Does not change pH.

Highly stabilized and quickly dissolving organic compound for water treatment in SPAs.

Initial treatment: Add 15 - 20 g of product for each m3 of water. After 2 hours, adjust the pH of the water to between 7.2 - 7.8 using the pH Reducer or pH Booster.

Maintenance Treatment: With the pH of the water adjusted, add 1 to 3 grams of product daily for each m³ of water.

These doses are indicative and can be modified depending on the characteristics of each SPA, climate, etc.

The initial treatment (superchlorination) must be repeated whenever a lack of transparency in the water is observed.

Introduce the required dose of product into a skimmer, then put the filtration equipment into operation, so that the product can dissolve as the water circulates through this skimmer.

You can also distribute the product dose evenly over the SPA surface. The addition of the product will preferably be carried out at dusk and without the presence of bathers in the SPA water.

Residual chlorine must be located at the same value indicated on the analytical strips. This control must be done at least twice a day.

COMPOSITION: Active ingredient (PT2/SG) Sodium troclosene, dihydrate 100% (m/m) 1000g/Kg

1 kg packaging

For more information, see the Technical Data Sheet.

For more information, see the Technical Data Sheet.