Remote Alarm Board

Systems in which the alarm is placed in a different location than the electrical panel or where there is a need to monitor the level, pressure, or any other situation, with an audible and luminous alarm.

Descrição
Plastic box 4 modules 231x166x113 mm in ABS gray RAL 7035 and cover with transparent window in polycarbonate.
Audible alarm (included in Alarm Module 423 MCS-AL02.).
Luminous alarm (included in the Alarm Module 423 MCS-AL02.).
Indication of the presence of supply voltage, through the yellow LED (10-11) of the Alarm Module 423 MCS-AL02.
Connection for remote alarm command (C11-C12) (probes, float, pressure switch or others).
Dry contact connection for remote indication of the light alarm on (17-18) of the Alarm Module 423 MCS-AL02.
Dry contact connection for remote indication of connected audible alarm (14-15) of Alarm Module 423 MCS-AL02.

Funcionamento
Whenever the alarm command (C11-C12) closes, the light alarm (red signal light) and the sound alarm (included in the Alarm module) will switch on, at the same time contacts 14-15 and 17-18 of the alarm module will also arm. alarm.

Acting on the reset key (RST) the alarm output (14-15) and the audible alarm are turned off, being necessary to momentarily cut off the power supply to the panel or the opening and subsequent closing of the alarm command (C11-C12) so that the output and the audible alarm turn on again.

After resolving the cause of the alarm (opening of the alarm command (C11-C12), all relays and signals turn off. By pressing the “TEST” key, the outputs (14-15 and 17-18) and the sound and light signals are tested .