Controlmatic RM Pressure Controller

Controlmatic is compact equipment for automatic control and protection of electric pumps, whose patented system is equipped with special electronic flow and pressure sensors integrated into an electronic circuit that controls the operation of the electric pump and maintains the pressure and flow constantly. It also has a safety system against the pump running dry. Controlmatic replaces the traditional autoclave, pressure switch and level switch system with a smaller, more compact size, eliminating periodic maintenance operations.

It turns on the pump automatically when any tap in the installation is opened. When the flow is interrupted by closing the taps, the pump stops.

Performances
Turns the pump on and off depending on the opening of the taps.
Maintains constant pressure during use.
Stops the pump if there is no water.
Dampens the effects of water hammer.
Adjustable starting pressure: 1.5 to 2.5 Bar

Technical Characteristics
Single-phase supply voltage: 230 V
Acceptable voltage variations: ±10%
Frequency: 50/60 Hz
Maximum intensity: 16(8)A - 1.5 kW
Degree of protection: IP65
Maximum exercise pressure: 10 Bar
Operating temperature: 0-60°C
Male joints: 1"
Body: Non-toxic thermoplastic
Membrane: special natural rubber
Spring: Steel DIN 17223 C/84
Flow valve: High-resistance technical thermoplastic
Check valve: High-resistance technical thermoplastic
Electronic board housing: Self-extinguishing thermoplastic resin
Molded circuit: FR4

Installation/Assembly
It is mandatory to mount this controller vertically. Otherwise the flow sensor will not work correctly.

Original made in Spain. Beware of imitations!

Datasheet