Product Description
Speed variator for SPEEDMATIC Master pumps, with the possibility of communication with another identical device.
The electrical power supply for the device is single-phase at 230V and two electropumps can be mounted individually or in groups communicating with each other, MASTER-SLAVE with alternating starting order.
This system constantly modulates the speed of the electric pump and only uses the energy that is essential for that purpose, in addition to reducing energy consumption, it increases the durability of the electric pump, as its mechanics are not always subjected to the maximum regime and does not produce knock effects. ariete since the starts and stops are progressive.
The power supply for this device is single-phase 230V. It stands out for its simplicity of programming and use, after connecting to the mains you only have to set the nominal pressure.
Características:
- Frequency variator for controlling the electric pump
- Function (Automatic Reset Test). If the device stops due to the action of the dry-running safety system, the device will automatically try to reset the system at programmed intervals to check whether the water level has been restored.
- Automatic reset system after power supply interruption. The system restarts in the same state it had before the interruption, keeping the configuration parameters.
- Internal pressure transducer.
- Control and information panel with LCD display.
- Record of operational commands. Information about: hours of operation, start-ups, electricity grid connections meter.
- Alarm log. Information about the type and number of alarms generated since device startup.
- Input for minimum water level switch. This system is independent of the electronic dry-running safety system.
Protecções:
- Overcurrent control and safety system
- Electronic control and safety system against dry running of electric pumps due to lack of water.
- Anomalous supply voltage.
- Short circuit.
Características Técnicas:
Modelo | 101110 Master |
Supply Voltage: | ~1x230 Vac |
Frequency: | 50/60 Hz |
Exit: | ~1x230 Vac ou 3x230VA |
Maximum current intensity: | 9 A |
Maximum peak current: | 20% 10" |
Protection index: | IP 55 |
Adjustment scale: | 0.5 - 12 Bar |
Maximum ambient temperature: | 50°C |
Maximum water temperature: | 40°C |
Hydraulic connections: | 1 1/4" M |
Maximum flow: | 10 m3/h |
Weight: | 2.50 kg |
Características Painel de Comandos:
- The control panel includes a multifunction LCD display, indication LEDs, START-STOP and AUTOMATIC switches and a configuration system.
Specification
Modelo | 101110 Master |
Tensão de alimentação: | ~1x230 Vac |
Frequência: | 50/60 Hz |
Saída: | ~1x230 Vac ou 3x230VA |
Intensidade máxima de corrente: | 9 A |
Pico máximo de corrente: | 20% 10" |
Índice de protecção: | IP 55 |
Escala de ajuste: | 0,5 - 12 Bar |
Temperatura ambiente máxima: | 50 ºC |
Temperatura máxima água: | 40 ºC |
Ligações hidráulicas: | 1 1/4" M |
Caudal Máximo: | 10 m3/h |
Peso: | 2,50 Kg |
Documents
Para mais informação, consulte a Ficha Técnica