BDP Confort Dehumidifying Center

The BDP heat pump is used to dehumidify indoor swimming pools, taking advantage of the vaporization heat and the device's own performance to heat the water in the reservoir and the pool's ambient temperature.

The energy savings achieved with these devices, compared to traditional air conditioning systems, makes their installation practically essential for the air conditioning of an indoor swimming pool. The wide variety of equipment covers all types of installations on the market.

Characteristics
• Aluminum construction with anti-corrosion magnesium;
• Thermoacoustic interior insulation;
• Single direct drive centrifugal fan. Optional Radial Fan;
• G4 type changeable air filter;
• Condensate collection tray with sewage pipe;
• A nitrogenated, dehydrated and deoxidized copper refrigerating circuit. Air condensation;
• Charging of ozone-friendly R407C refrigerant gas (environmentally friendly);
• Evaporator, condenser and hot water battery, made of copper tube, with lacquered aluminum fins (special for corrosive environments);
• Hermetic compressor mounted on an anti-vibration base;
• Expansion valve with pressure balancer;
• High and low pressure switch;
• General safety switch;
• Power line, compressor and fan motor/s protections;
• Complete adjustment of all equipment elements;
• 3-way valve and regulation when hot water coil is included.

Optional
• 1 or 2 stage electrical resistances, to support air heating;
• Hot water battery to support air heating, with 3-way valve, temperature probe and regulation (consult for primary temperatures other than those indicated in standard equipment);
• Free-cooling or mixing chamber and gate for outside air intake;
• Enthalpic regulation as an option in case of free-cooling.

General operating conditions
The thermohydrometric conditions considered optimal for materials and people are:
• Air 28ºC - 30ºC.
• 65% RH.
• Water 2ºC below air temperature

1) Dados a 28ºC de ar, 65% HR, água 24ºC.
2) Soma de retorno mais impulsão.