ESPA DRAINCOR Waste Water Grinder Pumps up to 16 m3/h

Submersible grinding electric pumps for pumping wastewater, septic tanks, infiltration water, rainwater and in general water with filamentary charges.

applications
For domestic, residential, industrial or agricultural use. Its design was designed with highly abrasion-resistant materials, which gives it a compact and robust appearance. Comes equipped with a DN40 thrust flange and an 11/2" 90º elbow
They have a silicon carbide/ceramic mechanical seal system to prevent water from entering the electric motor. The single-phase model can be equipped with a built-in level switch. All parts in contact with water are coated with an anti-corrosive treatment. They can work partially submerged, although for optimal operation, it is recommended that they work completely submerged.

Operation
Fluid: Sewer drainage water and carried water.
Maximum liquid temperature: 35 ºC
Maximum number of starts per hour: 30

Constructive Features
Pump body: FF GG20
Pump Base: FF GG20
Turbine: FF GG20
Motor Shaft: AISI 420 Stainless Steel
Float: Polypropylene (when applicable 230V with float)
Mechanical Seal: Double Silicon Carbide
Power Cable: 10 m of neoprene cable

Electric Motor
Submersible motors with IP68 degree of protection and class F insulation.
Single-phase 230 V - 50 Hz with permanent capacitor. For continuous operation, the electric pump must work completely submerged.
Three-phase 400 V - 50 Hz direct start.

Connections
Ø Output 11/2" DN40

note:
Pumps supplied with feet and 11/2" outlet elbow

Connections
Ø Output 11/2“

For more information, see the Technical Data Sheet and Instruction Manual