Baico Lascar HS Automatic Water Pumps

Pressure groups with automatic electronic start and stop control   and protection against lack of water, silent and maintenance-free. Pressurization for domestic use in houses, apartments, etc.

Integrated dry-running protection. IP 55 protection. Automatic operation with start at 1.5 Bar and stop at the maximum pressure reaching the pump.

It has a small accumulation to avoid cyclical starting and stopping in case there is any loss of water in the installation. If there is no water in the pump inlet, it stops automatically.

Silent multistage horizontal centrifugal pump, ideal for domestic pressurization and garden watering. Made with reinforced materials for great durability. Pump designed to work with an ON/OFF pressure controller or through a frequency inverter for fully automatic operation as a pressure group. Manufactured with robust components and corrosion-resistant materials, pump shaft and impellers in AISI 304 stainless steel, diffusers in PPO. Pumps designed for supplying water under pressure to houses, apartments, watering gardens, washing cars, filling tanks, etc.

Operation
Fluid: Clean waters and non-aggressive or viscous liquids, free of solid substances.
Maximum fluid temperature: 40 ºC
Maximum suction height: 8 m

Construction features
Suction body: Cast iron
Thrust body: Cast iron
Impellers: AISI 304 Stainless Steel
Diffusers: PPO
Outer housing: AISI 304 stainless steel
Motor shaft: AISI 420 stainless steel
Mechanical seal: Ceramic/Graphite

Electric Motor
Two-pole induction type, closed and self-ventilated, suitable for continuous operation, with degree of protection IX55 and class F insulation. Single-phase 230V - 50Hz with permanent capacitor or three-phase 400V - 50 Hz. Motors must be thermally protected by the user .

Connections
Suction: 1"
Compression: 1"

Flow Controller
Compact device for automatic control and protection of electric pumps. The patented system is equipped with special electronic flow and pressure sensors integrated into the electronic circuit that controls the operation of the electric pump and maintains constant pressure and flow and has a safety system against dry running. The COPRES K02 replaces the traditional autoclave, pressure switch, check valve and level switch system. This device starts the electric pump automatically when any water point is opened and stops it after a delay of 10-15 seconds as soon as there is no more water consumption.

Electric Motor
Two-pole induction type, closed and self-ventilated, suitable for continuous operation, with IP55 degree of protection and class F insulation. Single-phase 230V - 50Hz with permanent capacitor. Motors must be thermally protected by the user.

*The components of this kit are supplied in separate packaging.