Zodiac Z400 iQ Stainless Heat Pump

Unique design with its elegant lines and two available colors, the Z400 iQ adapts elegantly to your pool environment.

Ideal for areas by the sea, its version with a stainless steel front panel is particularly resistant to corrosion.
Silent and discreet
Thanks to its SILENCE mode and vertical air outlet, the Z400 iQ is a discreet heat pump that manages to go unnoticed even in small spaces.
Integrated Wi-Fi Using your smartphone, the Z400 iQ heat pump allows you to configure and check its operating mode remotely.

Technical characteristics

• Vertical air outlet;
• Polypropylene plastic parts, galvanized steel side cheeks with epoxy texture and 316L stainless steel front panel Polypropylene and galvanized steel, epoxy paint ( body ) or pre-painted ( front panel ) ;
• Digital display Heating priority mode (filter pump control);
• 2 -speed fan with silent mode (automatic or manual);
• Built-in Wi-Fi with dedicated app;
• Automatic cooling mode;
• Automatic defrosting (cycle inversion or forced ventilation);
• Antifreeze thermostat (minimum operating temperature - -12 ° C ;
• HP and LP safety pressure switch;
• Water flow switch;
• Titanium water exchanger condenser;
• Rotary vane compressor;
• Electronic expansion valve;
• Refrigerant - R410A ;
• Accessories included in the package:

• Winter cover;
• PVC 1/2 unions 50 ;
• Adjustable and anti-vibration feet;

• Mobile application ( free download ) ;
• 3 year warranty.

Key indicators for calculating consumption

There are two basic indicators to measure the performance of your heat pump: power and coefficient of performance (COP) . These indicators are used to compare different heat pumps with each other, always carrying out calculations at the same temperature ( air and water ) and under the same humidity conditions.
The power, expressed in kW , indicates the amount of heat transmitted to the pool water.
The coefficient of performance (COP) is calculated on the same basis, it is the ratio between the power supplied by the heat pump and the power it consumes. Therefore, the higher the COP , the greater the heating power of the pump, the greater its performance and the greater the savings.
A good heat pump has an efficiency of at least 3.4 , calculated under standard conditions ( air at 15 ° C / water at 26 ° C / 70% humidity ) .
For example, a coefficient of performance of 5 means that for every 1 kW of electricity consumed, the heat pump delivers 5x more energy to the pool water, or 5 kW .
Cable not included.

Hydraulic Connections

The connection must be made using a PVC ø50 pipe, using the half-union unions provided in the pool filtration circuit, after the filter and before the water treatment.
Respect the direction of the hydraulic connection
It is mandatory to install a by-pass to facilitate interventions on the device.