Zodiac Z200 heat pump

With the new Zodiac Z200 Heat Pump you will produce continuous heat even during the night for much less than you imagine.

Small in size but packed with features, all three Zodiac Z200 heat pumps come “intelli-heat” ready, simply set your desired water temperature and it will work effectively any time of day. It works completely independently of your filter cycles and is incredibly easy to set up and control.

Reliable and consistent heating solution. While a solar heater receives all of its heating energy from the sun, it is only effective on sunny days and may struggle to reach desired temperatures on cloudy or cooler days. This is where heat pumps shine. Heat pumps extract heat from ambient temperatures, making them effective even in colder climates.

Low electricity consumption. The Z200 heat pump extracts over 80% of its pool heating energy from the surrounding air, the same way a reverse cycle air conditioner works to keep you cool indoors. This heating method is very economical, giving all pool owners the opportunity to enjoy a warm pool during the winter.

Easy to install. The M3 and M4 plug and play models come factory equipped with a cable and plug for a simple and pleasant installation.

THE MOST COMPACT
With its dimensions reduced to the maximum, 40% compared to the Zodiac® Z300 model, the Z200 offers an effective solution and a minimum space occupation in your garden.

GUARANTEED TEMPERATURE RISE
By activating the “heating priority” functionality, the pool temperature is reached more quickly.

SUITABLE FOR MOST POOLS
Simple, reliable and economical, it adapts to any type of pool up to 70 m3.

The most compact
With its dimensions reduced to the maximum, 40% compared to the Zodiac® Z300 model, the Z200 offers an effective solution and a minimum space occupation in your garden.
Suitable for most swimming pools.
Simple, reliable and economical, it adapts to any type of pool up to 70 m³.

Technical characteristics
Horizontal discharge
Anti-corrosive polypropylene body
Digital display Heating priority mode (filtration pump control)
Automatic defrosting (cycle reversal or forced ventilation)
Antifreeze thermostat (minimum operating temperature: -5°C)
HP and LP safety pressure switch
Water flow switch
Titanium Water Exchanger Condenser
Rotary Vane Compressor
Electronic expansion valve
Refrigerant: R32

Warranty: 3 years

Accessories included in the package :
Hibernation Cover
PVC connections 1/2 unions 40 &50
Anti-vibration contacts

Optional accessories :
PAC Net Kit
Remote control Z200
Z200 wall square kit

The COP or coefficient of performance corresponds to the relationship between the power supplied to the pool water and the electrical consumption of the heat pump. As an example, a COP of 5 means that for every 1 kWh of consumption on the electricity meter, the heat pump supplies 5 times more energy to the pool water, i.e. 5 kWh. Therefore, the higher the COP, the better the performance and economy of the device. Attention: COP depends on temperature conditions (air and water) and hygrometry.

*Cable not included. Recommended section for a maximum length of 20 meters.

**According to EN60704-1:2010+A11:2012 standard

For more information, see the Technical Data Sheet .