Champion Submersible Water Pump SONDY-KISON

Aplicações:

Monobloc submersible pumps for pumping clean, non-aggressive water in applications such as filling tanks, fountains, rainwater collection systems, pressure equipment, water distribution, irrigation, etc. Due to its design it can work in open pits partially or completely submerged. Suitable for installation in holes of at least Ø 130 mm. It is advisable to install a non-return valve near the pump outlet to avoid water hammer. The pump must be left suspended in the well to avoid sucking up the sludge deposited at the bottom, never use the electric cable for this purpose. Supplied with float switch for protection against lack of water. It is supplied with an electrical panel with a condenser inside.

Funcionamento:
Fluid: Clean waters
Maximum liquid temperature: 35ºC
Maximum immersion depth: 20 m
Passage of solids: 150 g/m3
Maximum number of starts per hour: 20
Minimum pit diameter: 130 mm

Caracterísitcas Construtivas
Pump body: AISI 304 stainless steel
Pump Base: Stainless Steel AISI 304
Shaft: AISI 304 stainless steel
Turbine: PPO
Diffusers: PPO
Mechanical Seal: Double Ceramic / Graphite
External Float: With built-in switch
Power Cable: 20m

Motor Eléctrico
Submersible motors with IPX82 degree of protection and class B insulation. Water cooled
Single-phase 230 V - 50 Hz with external permanent capacitor .

Ligações
Ø Output 11/4“

Installation guide