Home >
CHS Automatic Water Pump

Product Name	Price	Delivery	Qty
Automatic Pump Press CHS 3-3, 3Bar, 3.0m3/h, 230V Cód.47I150020HD	€208.00
Automatic Pump Press CHS 3-4, 4Bar, 3.0m3/h, 230V Cód.47I150030HD	€224.00
Automatic Pump Press CHS 3-5, 5Bar, 3.0m3/h, 230V Cód.47I150040HD	€249.00
Automatic Pump Press CHS 5-3, 3Bar, 5.7m3/h, 230V Cód.47I150053HD	€273.00
Automatic Pump Press CHS 5-4, 5Bar, 5.7m3/h, 230V Cód.47I150054HD	€289.00

Product Description

The CHS is a high performance and silent multistage surface pump. By choosing the CHS surface pump equipped with CONTROLMATIC , you acquire a completely autonomous product that will offer you unprecedented comfort of use.

The CHS multistage pump is perfect for domestic uses such as irrigation, increasing pressure in the hydraulic network, supplying, etc. Equipped with the CONTROLMATIC controller, it allows comfortable use, as the user does not need to start or stop it before each request, as well as protecting the pump in case of lack of water.

The multistage (multi-turbine) function of the CHS pump allows it to be more efficient and quieter than a single-stage pump. Thanks to an advanced CONTROLMATIC electronic system, the pump turns on and off whenever a tap is opened or closed. In the event of a lack of water, CONTROLMATIC automatically stops the operation of the electric pump.

*The components of this kit are supplied in separate packaging.

Horizontal multistage centrifugal electric pump, silent, with excellent performance. CHS pumps are suitable for use with clean water. These pumps are widely used in domestic applications, such as water distribution in combination with small and medium pressure tanks, and for the irrigation of gardens and orchards, etc. The pump must be installed indoors or protected from the weather.

Operation
Fluid: Clean waters and non-aggressive or viscous liquids, free of solid substances.
Maximum fluid temperature: 35 ºC
Maximum suction height: 7 m
Max No. Starts/hour: 30

Construction features
Suction body: Stainless steel (AISI304)
Thrust body: Stainless steel (AISI304)
Impellers: Stainless Steel (AISI304)
Diffusers: Noryl with fiberglass
Outer housing: AISI 304 stainless steel
Motor shaft: AISI 416 stainless steel
Mechanical seal: Ceramic/Graphite

Electric Motor
Two-pole induction type, closed and self-ventilated, suitable for continuous operation, with IP44 degree of protection and class F insulation. Single-phase 230V - 50Hz with permanent capacitor or three-phase 400V - 50 Hz. The motors must be thermally protected by the user .

Connections
Aspiration: CHS 3 and CHS 5 - 1"
Compression: CHS 3 and CHS 5 - 1"