ESPA KIT02 Automatic Water Pump up to 3.9 m3/h

Pump from the ESPA brand model PRISMA , horizontal multistage centrifuge, silent and with excellent performance, suitable for domestic applications, pressure groups and irrigation systems.

Equipped with an electronic device for automatic control and protection of the electric pump, this system is equipped with an electronic sensor integrated into the circuit that controls the starting and stopping of the electric pump and has a safety system against dry running.

Replaces the traditional autoclave, pressure switch, check valve and level switch system. This device automatically turns on the electric pump when any water point is opened and stops after a delay of 15 to 20 seconds as soon as there is no more water consumption.

Very compact, silent and with great suction power.

Operation
Fluid: Clean waters and non-aggressive or viscous liquids, free of solid substances.
Maximum fluid temperature: 40 ºC
Maximum suction height: 7 m

Constructive characteristics
Suction body: Cast iron with cataphoresis treatment
Drive body: Cast iron with cataphoresis treatment
Impellers: AISI 304 Stainless Steel
Diffusers: Technopolymer
Outer housing: AISI 304 stainless steel
Motor shaft: AISI 431 stainless steel
Mechanical seal: Ceramic/Graphite

Electric Motor
Two-pole induction type, closed and self-ventilated, suitable for continuous operation, with IPX5 degree of protection and class F insulation. Single-phase 230V - 50Hz with permanent capacitor or three-phase 400V - 50 Hz. Motors must be thermally protected by the user .

Connections
Suction: 1"
Compression: 1"

*The components of this kit are supplied in separate packaging.

Group composition:
#1 - ESPA electric pump model PRISMA
#2 - Controlpump Coelbo KIT 02
#3 - PVC Male Thread Junction 1"

For more information, see the Technical Data Sheet